Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Fence Installation: The Pasadena Owner’s Guide
Boral fence installation in Pasadena typically costs between $3,500 and $9,000 for a complete run of Boral fencing or section replacement, depending on linear footage, post condition, and whether we’re matching existing Boral board profile. We carry Boral-compatible boards, posts, and rails on the truck for same-week scheduling, and our crews work in Pasadena neighborhoods from Bungalow Heaven to Linda Vista every week. Most Pasadena homeowners discover the issue the same way: they notice one sagging section near a sprinkler head, or they find that the bottom board has started to swell and split after a few years of irrigation overspray, or a post has gone soft at the base because water sat against it through two winters.
Which Boral Models This Applies To
Boral fencing in the Pasadena market generally falls into a few familiar lines: the Boral B-series board-on-board and shadowbox profiles, the Boral Timberline tongue-and-groove system, and the post-and-rail kits sold through Southern California lumber yards that carry the Boral brand name. If your boards are still stacked or the gate is hung, look for the printed fastener pattern on the backside of any loose board, or check the top rail for an embossed stamp near the post cap. The quickest identification is the board thickness: Boral boards in Pasadena run either 5/8-inch or 3/4-inch actual thickness, and the 3/4-inch line uses a wider post pocket that the thinner board won’t sit in correctly. We stock both thicknesses and can match the profile by taking a small offcut with us back to the shop before we write the estimate, so the price on paper reflects the actual board, not a guess.
One decision worth understanding up front is OEM versus aftermarket. Boral’s own board stock is widely available through Pasadena suppliers, but aftermarket boards that claim to be “Boral-compatible” sometimes come in half-inch thickness with a different tongue depth. They’re cheaper per linear foot at first, and they’re also the first thing to cup under Pasadena sun. We’ll show you the difference on a sample before you choose, and the written quote will name the exact manufacturer. We are an independent contractor, not affiliated with Boral, which means we stock Boral boards because Pasadena homeowners ask for them by name, not because a supplier agreement tells us to.
Styles & brands we work with
Signs Your Boral Fence Installation Is Failing
- Boards swelling at the bottom 6 inches. This is irrigation overspray or soil contact. Pasadena’s clay-heavy soil holds moisture against the board and wicks it upward. The board becomes spongy at the base while the middle stays solid, which means replacement, not repair.
- Post leans backward or toward the street. Most Pasadena lots slope, even slightly, and water follows the slope. A post that was set in quick-mix concrete without a gravel base will soften gradually, then lean suddenly after a heavy rain. The board run is usually still good; the post footer is gone.
- Gap opens between boards in summer, closes in winter. Wood and wood-composite fencing breathe with Southern California’s wet-dry seasonal swing. A 1/4-inch seasonal gap is normal; a 3/4-inch gap with visible splitting along the tongue means the board has reached the end of its life.
- Fasteners backing out on the rail side. Boral boards are dense. When a general contractor uses standard deck screws instead of the coated, coarse-thread fasteners the dense board stock needs, the threads strip under Pasadena sun expansion and the board walks off the rail. We see this pattern often enough that we keep a bucket of correct fasteners on every truck.
- White chalky film along the top edge of boards. This is mineral bloom from repeated wet-dry cycles. It tells us moisture has been sitting in the upper board for a while. The top board needs replacement, and the root cause is usually a missing post cap or an overflowing gutter draining directly onto the fence line.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a typical Pasadena residential property of about 60 to 100 linear feet, Boral fence installation runs $3,500 to $9,000. Section repair and partial replacement lands at the low end: we’re reusing sound posts, swapping failed boards, and re-securing the rails, usually $1,800 to $3,200 for 20 to 30 linear feet. Full runs with new posts, new concrete footers, and all new Boral boards start at the middle of that range and climb with fence height, gate hardware, and whether the old concrete needs to be broken out and hauled. We measure, we write the number down, and the price doesn’t move after the crew arrives. The quote includes parts, labor, concrete, fastener replacement, and clean-up with a photo of the finished area before we leave.
Our installed price also carries the 365-Day Done Right Promise: if a board fails or a post shifts within a year, we fix it. No charge-back, no argument. The price you see on paper is the price you pay at the end – no footnotes.
DIY or Call Us?
You can safely check the obvious things yourself: whether sprinkler heads are hitting the fence line, whether soil has built up against the bottom boards, whether post caps are still seated. These tell you why it failed. Replacing a Boral board correctly is a different matter, because the boards are heavy, the post pockets are tight, and Pasadena’s Saturday-afternoon sun turns a two-hour job into a five-hour one if you’re working without shade and the right fasteners. The fence itself is not a high-tension danger like a garage spring, so the risk is less about injury and more about getting the footer depth wrong and having the whole section lean within a year. If the post is gone, we’d rather see you call us at (626) 714-2992 before you rent an auger. A post set to the wrong depth in Pasadena clay is a fence section you’ll pay to redo.
FAQs
A correctly installed Boral fence in Pasadena lasts 15 to 25 years, with the wide range driven by irrigation overspray, soil contact, and drip-line shade. Boards in full south-facing sun without a tree canopy tend to fail first at the top edge; boards next to lawns tend to fail first at the bottom.
Yes, when the posts are sound and the failure is limited to boards or fasteners. If a post has gone soft at the base, replacing the post and reusing boards is possible but often costs within a few hundred dollars of replacing the whole section, at which point the section replacement is usually the better use of money. Call (626) 714-2992 and we’ll tell you honestly which one your fence needs.
Most Pasadena fence replacements take one to three working days from first post hole to final clean-up. Partial board swaps are usually done in one day, and we schedule around your family’s quiet hours so the work isn’t happening during nap time or homework time.
We stock both 5/8-inch and 3/4-inch Boral-compatible boards, posts, rails, and fasteners on our trucks, and we can get special-order profiles from local Pasadena suppliers within a few days. The written estimate will name the exact board and profile so you can verify it yourself.
If your Boral fence needs boards, posts, or a fresh run along the property line, call (626) 714-2992 for a free estimate. We’ll measure, hand you a written price, and leave the house cleaner than we found it.
Written by Graham Stein, Owner, Elmstead Remodeling Pasadena at Elmstead Remodeling Pasadena, serving Pasadena and nearby areas.
