A Elmstead company - serving Pasadena, CA
An open living room and dining area after a whole-home remodel

Ameristar Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Pasadena
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A whole-home remodel with the living, dining and kitchen areas opened up
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Ameristar Roofing: The Pasadena Owner’s Guide

If you have an Ameristar roof that’s leaking, lifting, or showing wear around the flashing, you’re likely looking for a straight answer on cost and timeline. In Pasadena, an Ameristar-compatible roof repair typically runs $400 – $1,800 installed, and a full Ameristar roof replacement lands between $8,000 and $20,000 depending on square footage, pitch, and how much decking needs attention. Most homeowners first notice the problem as a water stain on the ceiling after a Santa Ana wind event, or a shingle in the yard after a strong overnight gust. We stock common Ameristar-compatible shingles, ridge caps, and underlayment on our trucks, so a repair is often handled in a single visit.

Call (626) 714-2992

Elmstead Remodeling Pasadena is an independent service provider and is not affiliated with Ameristar or its manufacturer network. What that means for you is simple: we match the product spec honestly, give you the written price before any work begins, and we don’t touch your roof until you’ve seen the line items.

Which Ameristar Models This Applies To

A built-in window seat in a bay window

Ameristar roofing products are sold through a network of independent distributors, so the shingle on your Pasadena roof may carry a different badge than the one your neighbor has, even if both were installed the same year. The most common Ameristar lines we work with in this area are the architectural laminate shingles and the heavier dimensional profiles that builders specified on tract homes and custom builds across the San Gabriel Valley. The compatibility gotcha most owners run into is this: Ameristar laminate shingles have a slightly different exposure and sealant strip placement than some big-box generics, so a mismatched patch can look fine from the street but fail to seal properly along the bond line. That gap is where wind-driven rain gets in.

To identify what you have, check the nailing edge on the back of a loose shingle for the Ameristar name or a series code, and measure the exposed face. Most Ameristar architectural shingles run between 5-5/8″ and 6-1/4″ of exposure per course. If you can’t safely reach the roof itself, a photo of the shingle face plus a measurement from the eave to the first course seam is usually enough for us to identify the match. For homeowners weighing OEM versus aftermarket, our honest take is this: on a roof with more than ten years on it, a high-quality aftermarket architectural shingle in a matching color often outperforms chasing an exact Ameristar match that’s been discontinued. The color variation on a ten-year-old roof means a fresh Ameristar bundle will stand out anyway. We’ll show you both options and the price difference before you decide.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Ameristar Roofing Is Failing

  • Granule loss in the gutter or at downspout elbows. Ameristar shingles shed surface granules as the asphalt layer ages, and on a steep Pasadena roof, that grit collects fast. If you’re seeing a quarter-inch of dark granules in the gutter after a rain, the shingle surface is degrading faster than it should, usually because the roof is past its useful life or was under-ventilated from day one.
  • Lifted or flapping shingle tabs along the eave edges. The sealant strip on an architectural shingle loses grip after years of direct sun and the occasional freeze-thaw morning in the foothills. When tabs lift, wind can peel an entire course. This is the most common spring repair call we get from Bungalow Heaven and the Craftsman neighborhoods around Caltech.
  • Curling at the corners with visible shadow lines. Corner curl on an Ameristar laminate means moisture has gotten between the layers and the shingle is delaminating from the inside. You’ll see it most on south-facing slopes where direct afternoon sun bakes the roof from noon to sunset.
  • Water staining on ceilings or around skylights after a steady rain. A single soaked decking board behind a failed shingle will telegraph through the drywall within 24 to 48 hours. In Pasadena’s older homes, stains around chimneys and solar tube penetrations often point to failed step flashing, not the shingle itself.
  • Daylight visible through the attic decking boards. If you can see pinpoints of light through the plywood when you’re up in the attic, the underlayment and shingles are both gone. On Ameristar roofs with original builder-grade underlayment, this typically shows up around year 18 to 22, a little sooner on homes with no ridge vent.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled family room with new windows and a window seat

For a Pasadena home with an Ameristar roof, our repair work starts at $400 and runs to about $1,800 depending on how many courses are compromised, whether the decking below is sound, and whether flashing at a chimney or dormer is involved. A full roof replacement using Ameristar-compatible architectural shingles runs $8,000 to $20,000, with the spread driven by square footage, roof pitch, tear-off depth, and the condition of the existing decking. Every quote includes the same line items in writing, before any work begins: material specification, tear-off and disposal, decking repair at a per-sheet rate, underlayment and ice-and-water shield at the eaves, and the final clean-up. No change orders on the back end.

Our workmanship warranty covers the installation for a full year, and the manufacturer warranty on the shingles travels with the product itself. We write the scope the way Graham Stein learned to on Craftsman-era homes in Bungalow Heaven: every layer named, every cost spelled out, nothing left for the homeowner to guess at. “The price you see on paper is the price you pay at the end – no footnotes.”

DIY or Call Us?

Roof work in Pasadena sits in a different risk category than swapping a faucet. A 6/12 pitch roof is not a ladder-friendly surface, and the fall risk is real even for experienced hands. That said, there are two things you can safely do before calling us. First, check the gutters and downspout outlets for granule accumulation after the next rain. Second, walk the attic on a sunny afternoon and look for light through the decking. Both tell us a lot before we ever set a ladder.

What we don’t recommend is a homeowner on the roof replacing shingles themselves, especially on an older Ameristar roof where the sealant strips are brittle and the decking may be soft in spots you can’t see from above. A misstep on a soft decking board is a hospital visit. We’d rather you call (626) 714-2992 and let us put eyes on it. The estimate is free, and it comes with a written line-item scope before you commit to anything.

FAQs

A remodeled primary suite with built-in wardrobes and a window seat

Getting started with Elmstead in Pasadena

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Pasadena team

A local crew that works across Pasadena and the towns around it, to the same written standard as every Elmstead location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Pasadena? Licensed & insured · Written quotes before work starts response · free estimates
Call (626) 714-2992
Local Service Coverage

Request a Free Estimate in Pasadena

Tell us what you need - Elmstead Remodeling Pasadena responds fast. No obligation.

When you send us your details, you acknowledge our Privacy Policy and consent to receive communications by call, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Now
Call Now - 24/7 Dispatch