Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Pasadena Homeowners Choose Delta Construction
We provide Pasadena Delta service for independent construction repair and remodeling across the city, focusing on the cabinetry, vanities, and built-in features common in the city’s Craftsman, Spanish Colonial, and mid-century ranch homes. Our crews work on Delta Classic Series, Elegance Series, ProCraft, and Builders’ Series installations regularly, so we know how these lines age in Pasadena’s specific climate and what it takes to repair them properly without gutting the house. The written price you see on paper is the price you pay at the end, no footnotes, on every Delta job we take. Call (626) 714-2992 to schedule a free estimate.
One thing to be clear about from the start: Elmstead Remodeling Pasadena is an independent General Contractor for Delta remodeling and repair. We are not a Delta-authorized service company, and we have no corporate affiliation with Delta. What that means for you is straightforward: we answer to the homeowner, not to a manufacturer’s service protocol, and we make repair-or-replace calls based on what will actually hold up in a Pasadena home, not on what pushes a new cabinet order.
Why Trust Elmstead Remodeling Pasadena for Your Delta Construction?
Graham Stein, owner of Elmstead Remodeling Pasadena, grew up in Los Angeles and learned the trade at Los Angeles Trade-Technical College before spending nearly two decades on projects across the San Gabriel Valley. He and his crew have worked steadily through Pasadena’s Bungalow Heaven neighborhood, where the older Craftsman bones require careful demo and a slower hand than most crews are willing to give. That patience shows up in the work, especially on Delta cabinetry, where a rushed repair to a face frame or a hinge screw hole turns into a call-back six months later.
We know Delta’s product lines from years of opening up their cabinet boxes and seeing how they fail. The Classic Series, common in Pasadena ranch homes built between the 1950s and 1970s, used particleboard side panels that do not hold fasteners well after a first failure. The Elegance Series raised-panel oak and maple faces are sturdier but still prone to face-frame warping from Pasadena’s dry summer heat and the occasional damp crawlspace air. Our technicians understand these failure modes before they pick up a screwdriver, which means fewer surprises on the quote and fewer change orders after work starts. Every Delta job gets a written line-item price before any work begins, and a photo of the clean-up before the crew leaves.
Styles & brands we work with
Common Delta Construction Problems We Fix in Pasadena
- Warped face frames on Delta Classic Series cabinets. Pasadena’s hot, dry summers and cool, wet winters cause significant expansion and contraction in wood, and after decades, face frames on Classic Series cabinets can pull out of square. Doors start to catch, gaps appear at the top, and the cabinet looks tired. We remove the doors, correct the frame alignment where possible, and reface when the warp is too far gone.
- Delaminated laminate countertops at the sink cutout. Original Delta Builders’ Series installations in mid-century Pasadena additions used laminate tops, and the sink cutout is where water always found its way in. The laminate peels back, the particleboard swells, and the edge looks like it belongs in a demolition dumpster. We replace these tops with new quartz or granite, and we waterproof the seam so the same failure does not return.
- Loose or stripped hinge screws in particleboard cabinet sides. Delta lines from the 1950s through the 1970s used thin particleboard for cabinetsides. Once a hinge screw strips out, the door sags, and you cannot simply drive a bigger screw into the same hole. We drill out the stripped site, set a hardwood plug, and re-hang the door so it closes true. Patch-over attempts always fail; a proper plug repair holds for years.
- Water damage at the toe kick on Delta ProCraft vanities. Pasadena bathrooms from the mid-century often still have their original ProCraft vanities, and the toe kick is where mop water and shower splash pool. The bottom edge swells, the finish blisters, and the vanity looks worse than the rest of the bathroom. We assess whether the damage is cosmetic or structural. When it is structural, we rebuild the toe kick with plywood and match the stain to the surrounding doors.
- Grout and setting-bed failure on Delta-era tile floors. Many Pasadena homes with original Delta cabinetry also have original tile flooring installed over subfloor that was never reinforced. Six decades of movement cracks the grout, loosens the tile, and leaves the floor feeling hollow underfoot. We pull the tile, reinforce the subfloor, and reset or replace the flooring so the finished surface sits solid.
Delta Parts & Our Repair-vs-Replace Approach
Delta cabinetry from the mid-century era does not have a meaningful OEM parts channel today. The manufacturer no longer makes replacement face frames, hinge plates, or door fronts for Classic Series or Builders’ Series installations built sixty years ago. Chasing non-existent OEM parts wastes your time and adds nothing to the finished quality. So we use quality aftermarket parts sourced from local Pasadena suppliers, matched to the profile and finish of your existing cabinetry, and we stand behind those materials with our 365-Day Done Right Promise.
On the repair-vs-replace question, our position is simple and honest. Cosmetic issues, like scratched doors or a faded face frame, are usually worth repairing, especially when the original Delta doors are solid wood. Structural failures, like particleboard sides that have already stripped out once, are usually worth replacing with plywood boxes, because thin particleboard does not hold fasteners well after a first failure. We will never push a full cabinet replacement when a repair will hold. We will also never patch a structural failure just to keep the quote low. For Delta repair in Glendale or Pasadena, call (626) 714-2992 if you want an honest read on what your Delta cabinets actually need.
Our Delta Service Process – Step by Step
- 1
Walkthrough and diagnosis. We open the cabinet doors, run a level across the face frames, check for soft spots at the toe kick and sink base, and take photos. You get a written diagnosis of what is failing and why, in plain language, before any work starts.
- 2
Repair or install plan with a fixed price. We lay out the repair-or-replace decision for every affected component, with line-item costs. If the repair turns out to be cosmetic, you see a repair price. If it is structural, you see a replacement price. Either way, the number on the page is the number you pay.
- 3
Work, with the house protected. Shoe covers and drop cloths go down before a single tool comes out. Quiet tools during family rest hours where possible. We ask before moving anything that belongs to you, including the kids’ step stool that is always in the way.
- 4
Testing and clean-up. Every repaired door is opened and closed repeatedly, every drawer is cycled, every seam is checked for water entry. Then we clean up, take a photo of the clean-up as proof, and walk you through what we did.
- 5
Warranty and follow-up. Every project is covered by the 365-Day Done Right Promise. If something is not done right after the job is complete, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterDelta Products We Service & Install in Pasadena
We service and install across the Delta lines most common in Pasadena’s housing stock: Classic Series pre-hung cabinet lines from the 1950s through 1970s, Elegance Series raised-panel oak and maple faces, ProCraft bathroom vanities often paired with period tile, and Builders’ Series stock cabinets with laminate tops from mid-century additions. For cabinet refacing and installation, we work with KraftMaid and Wellborn cabinets, Cambria, Silestone, and Caesarstone countertops, and Kohler, Moen, and Grohe fixtures, so when a Delta cabinet replacement is the right call, the new materials come from brands with manufacturer warranties homeowners can verify independently.
We Also Service These Brands
While this page focuses on Delta, our crews install and service cabinetry and surfaces from KraftMaid, Cambria, Silestone, and Kohler, among others. That multi-brand experience matters when a Pasadena kitchen mixes original Delta cabinetry with newer countertops or fixtures. We do not have a reason to push one brand over another; we recommend what fits the home and the budget.
FAQs – Delta Construction Service in Pasadena
My 1960s Pasadena home has original Delta Classic cabinets with damaged face frames, can you reface them without replacing the boxes?
Yes, in most cases. If the cabinet boxes are still square and the particleboard sides have not already failed, we can reface the face frames and doors rather than tear out the entire kitchen. We match the existing profile as closely as possible and refinish to blend with the surrounding cabinets. If the face frame damage is too extensive or the boxes have structural problems, we will tell you honestly and show you where the repair ends and the replacement begins. Call (626) 714-2992 for a free estimate on your specific cabinets.
Our Delta Elegance bathroom vanity has water damage at the toe kick, is it better to repair or replace the whole unit?
It depends on how far the water has traveled. If the toe kick is swollen but the cabinet sides and floor are still solid, we can cut back the damaged section, rebuild the toe kick with plywood, and refinish to match the rest of the vanity. If the water has wicked up into the cabinet floor or the side panels, the vanity is usually not worth saving, and we will recommend replacing it with a new unit from a brand with a current manufacturer warranty. Either way, we will show you the damage and explain the call before we quote the work.
Do you use original Delta hardware when refacing cabinets from the Delta Builders’ Series?
Original Delta hardware from the mid-century is rarely available, and when it is, it is often worn past the point of reliable function. We use quality aftermarket hinges, pulls, and fasteners sourced from Pasadena suppliers, matched to the cabinet profile and finish. For homeowners who want to keep their original visible hardware, we can often clean and restore it, but internal hinges and screws are replaced as needed to keep the doors closing correctly.
Can you match the stain on my Delta Classic cabinets after repairing a water-damaged door?
Yes. We match stains by working from the existing color and grain on your cabinets, using the same finishing approach we use on refacing projects across Pasadena’s mid-century homes. No two sixty-year-old cabinets have aged exactly the same way, so we test the match on a hidden area before finishing the visible face. The goal is a repair that does not announce itself from across the kitchen.
Our Delta-era kitchen has original tile countertops that are cracked at the edge, can you replace just the tile without a full remodel?
We can, with a caveat. If the tile damage is isolated and the subfloor beneath it is still solid, we remove the damaged tile, rebuild the edge, and set new tile to match the existing pattern as closely as current materials allow. If the subfloor has failed, which is common in Pasadena homes where original tile was installed without reinforcement, a partial repair will crack again. We will check the subfloor before we quote either way, and the written price will reflect what we actually find.
How much does Delta construction cost in Pasadena?
Delta-related kitchen and cabinet work in Pasadena falls into predictable ranges, and we quote every job with a written line-item price before work begins. Here are the current ranges for the work we do on Delta cabinets and the kitchens around them:
| Project | Price Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Call (626) 714-2992 for an exact quote on your Delta repair or remodel. Estimates are free, and the written price you approve is the price you pay.
Book Your Delta Service in Pasadena, CA
If your Pasadena or Delta repair in Maywood area home has cabinets or vanities that need repair, refacing, or replacement, call Elmstead Remodeling Pasadena at (626) 714-2992 to schedule a free estimate. We will walk the space, name the problems we find, and put a written price in front of you before any work starts.
Written by Graham Stein, Owner at Elmstead Remodeling Pasadena, serving Pasadena since 2005.
