Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Kitchen Remodeling: The Pasadena Owner’s Guide
If you have ES Windows products in your Pasadena kitchen and a part has failed or is failing, we stock compatible replacement components and install them for a typical project cost of $14,000 – $45,000 depending on scope. Most ES Windows kitchen remodeling jobs in Pasadena take two to six weeks, not months, because we order the specific part or matching component before demo day. Homeowners usually discover the failure in one of two ways: a window or glazing unit that no longer seals, fogs between panes, or won’t close cleanly; or a kitchen component tied to the window installation, like surrounding trim, casing, or the cabinetry adjacent to the ES Windows frame, that shows water staining, gaps, or movement.
Before any work starts, we put a written price in front of you. That includes the ES Windows part or compatible replacement, the labor, the finish work around it, and the clean-up. No footnotes. Graham Stein has walked enough Pasadena kitchens in Bungalow Heaven and the neighborhoods around Victory Park to know that an ES Windows failure usually isn’t just the glass. It’s what the failed seal or shifted frame did to the wall, the sill, and the cabinet run next to it over two or three rainy seasons.
Key takeaways:
- We install and finish ES Windows-compatible kitchen components in Pasadena for $14,000 – $45,000, with smaller scoped repairs starting lower.
- Every job gets a written, line-item price before the first drop cloth goes down.
- We carry OEM ES Windows parts where available and quality equivalents when OEM is discontinued or backordered.
- Clean-up is documented with a photo before the crew leaves, every time.
- Call (626) 714-2992 and a live person answers, 24/7.
Which ES Windows Models This Applies To
ES Windows builds a range of aluminum and thermally broken window and door systems, and the kitchen remodeling work around them depends heavily on which series you have. The two most common lines we see in Pasadena are the 400 series single-hung and casement units, and the 700 series thermally broken frames specified on newer thermal-efficiency remodels. The compatibility gotcha: ES Windows frame depths vary between the non-thermal and thermally broken series, and the jamb extensions, interior casing, and sill profiles are not interchangeable between them. If your part order relies on a label you can’t find, we measure the visible glass, the frame depth, and the corner construction, then match that against the ES Windows spec rather than forcing a near-fit that leaves a 3/8-inch gap we would have to hide with trim.
For ES Windows specifically, we prefer genuine OEM parts when the window itself is under ten years old and the manufacturer still supports the series. When a part is discontinued or the lead time runs past a reasonable kitchen schedule, we source quality aftermarket equivalents that match the frame color, thermal break alignment, and hardware mounting pattern. You’ll know before we order which route we’re taking and what it costs. The same named-brand discipline applies to the rest of the kitchen: cabinets from KraftMaid or Wellborn, countertops from Cambria or Silestone, and fixtures from Kohler, Moen, or Grohe.
Styles & brands we work with
Signs Your ES Windows Kitchen Remodeling Is Failing
- Condensation or fog between the glass panes. The insulating glass unit seal has failed. Once that seal breaks, the ES Windows unit loses its thermal performance and the fog will not go away on its own. In Pasadena’s dry summers this can hide for months, then show up hard during winter morning temperature swings.
- Water staining on the interior sill or the drywall below the window. That usually means the frame drainage is blocked or the window-to-wall flashing was never sealed correctly during the original installation. By the time the stain is visible, the sill and possibly the adjacent cabinet base have been wicking moisture.
- The window binds, sticks, or won’t fully close without force. Aluminum frames expand and contract with temperature, but persistent binding signals a frame that has shifted or a hardware track that has worn past tolerance. Forcing it closed bends the operator and makes the part replacement more involved later.
- Soft or swollen millwork around the ES Windows frame. The cabinetry or casing beside the window has taken on moisture and the finish is lifting. Ignoring it means replacing cabinet boxes, not just a window part.
- Drafts you can feel at the window perimeter on cool mornings. Weatherstripping on ES Windows units is replaceable, but if the frame has racked out of square, new gaskets won’t fix the gap. The frame itself needs to be re-set before the kitchen finishes around it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Pasadena, a full kitchen remodel that includes addressing failed ES Windows components runs $14,000 – $45,000. A scoped job replacing a single failed window unit, repairing the surrounding rough opening, and re-trimming the interior typically starts at the low end of that range. The bigger number comes into play when the failed window has already damaged cabinets, flooring, or the wall assembly, and the kitchen needs to be rebuilt around the correction.
What moves the price within that range: the number of ES Windows units involved, whether we’re doing thermal-efficiency upgrades like the 700 series, the condition of the rough opening once the old unit comes out, and the material selections for the rest of the kitchen. Every estimate includes the written line-item breakdown, drop cloths and shoe covers, quiet tools during nap hours where possible, a photo of the clean-up before the crew leaves, and the 365-Day Done Right Promise: if something isn’t done right, we make it right. That promise is stamped on the paperwork, not just mentioned in a sales pitch.
DIY or Call Us?
There are two honest sides to this. What you can safely check yourself: the manufacturer label on the interior frame edge for the series and size code, the date the windows were installed if you have it, and photos of the failure, especially the fog pattern or water stain. That helps us quote faster without a second visit. What you should not do yourself: removing an ES Windows frame or the glass unit. The units are heavy, the frame is often load-bearing in the opening, and an improper removal can crack the stucco or siding, damage the waterproofing plane, and turn a $1,500 window part replacement into a $15,000 wall repair. We have crews who do this in Pasadena every week, and they carry the right lifts, the right sealants, and the right staging for Bungalow Heaven’s tight walkways. Call (626) 714-2992 and we’ll tell you over the phone which route your job actually needs.
FAQs
Plan on 15 to 25 years for the frame and hardware, and 10 to 20 years for the insulating glass seal before fog or condensation appears. Pasadena’s hot, dry summers followed by cool winter nights put real thermal cycling on the sealant; units on south and west exposures tend to fail earlier than those on shaded north walls.
Sometimes, yes. Failed weatherstripping, bent operators, and clogged weep channels are repairs we do often. A failed glass seal or a racked frame cannot be meaningfully repaired; the correct fix is replacement of the glass unit or the frame section. We’ll tell you which one you have before we write a number. Call (626) 714-2992 for an exact diagnosis.
For a single window unit with no wall or cabinet damage, the swap is usually one working day. If the surrounding millwork, sill, or adjacent cabinet run needs to be rebuilt, expect two to six weeks, depending on material lead times. We order the ES Windows part or confirmed equivalent before we start, so the crew isn’t waiting on a truck.
We keep common ES Windows-compatible weatherstripping, hardware, and thermal-stop profiles on the trucks, and we order the larger units, frames, and thermal glass packages per project from the manufacturer or our confirmed equivalent suppliers. When you call (626) 714-2992, we’ll check current availability while you’re on the phone, not call you back next week.
No. The written line-item price you approve before any work begins is the price you pay at the end, unless the scope of work changes by your choice, in writing. “The price you see on paper is the price you pay at the end – no footnotes.” That covers the ES Windows part, the labor, the finish work, and the clean-up down to the photo we take before we roll up the drop cloths.
Written by Graham Stein, Owner, Elmstead Remodeling Pasadena at Elmstead Remodeling Pasadena, serving Pasadena and nearby areas.
