Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Pasadena Homeowners Choose ES Windows Construction
We provide independent ES Windows construction, repair, and replacement service across Pasadena, from Craftsman bungalows in Bungalow Heaven to mid-century ranches near Victory Park. Our crews work on ES Windows 900 Series aluminum units, 7000 Series vinyl windows, 1000 Series architectural aluminum, and Impact Gard hurricane-rated lines, with parts sourced to match the original frame, not just close enough. What sets our work apart is the written price before any work starts and the 365-Day Done Right Promise on every completed job. We are not affiliated with or authorized by ES Windows. We are an independent Pasadena remodeling contractor with hands-on experience servicing these specific window lines. Call (626) 714-2992 to schedule your free estimate.
Why Trust Elmstead Remodeling Pasadena for Your ES Windows Construction?
Graham Stein, owner of Elmstead Remodeling Pasadena, grew up in Los Angeles and learned the trade at Los Angeles Trade-Technical College before spending nearly two decades swinging a hammer across the San Gabriel Valley. He and his crew have worked steadily through Pasadena’s Bungalow Heaven neighborhood, where the older Craftsman bones require careful demo and a slower hand. That same patience carries over to ES Windows work. A 900 Series aluminum slider in a 1960s ranch house does not come out the way a newer vinyl unit does, and knowing the difference is the job.
Our technicians have handled the specific failure modes these windows develop in Pasadena’s climate: welded vinyl corner failures on south-facing 7000 Series sliders, balancer fatigue in 900 Series double-hungs, and worn rollers on 1000 Series sliding doors. We stock common ES Windows parts locally for faster turnaround and use OEM-compatible replacements when the original part is still produced. When a series has been discontinued, we source high-quality aftermarket parts matched by size and color through our supplier network. Every job starts with a written price, and our crew arrives with shoe covers, drop cloths, and a plan for quiet hours if your family needs them.
Styles & brands we work with
Common ES Windows Construction Problems We Fix in Pasadena
Here are the five issues we see most often on ES Windows units in Pasadena homes. Each one has a specific cause, and the fix is rarely as simple as a YouTube video makes it look.
- Failed welded corners on 7000 Series vinyl sliders. South-facing walls in Pasadena absorb long afternoon heat, and vinyl expands and contracts repeatedly over the years. The welded corner at the bottom of the sash eventually separates, letting air and water seep into the track. We see this on homes near San Pasqual Street and throughout the mid-century ranch neighborhoods. The proper fix is to pull the sash, clean the corner, and re-weld or replace the sash with a reinforced corner key, not to caulk over the crack and hope for the best.
- Balancer failures in 900 Series aluminum double-hungs. The spring balances on these older units fatigue after years of use, especially in stucco openings where the frame has shifted slightly and the sash no longer travels straight. The symptom is a window that slams shut or will not stay up. We replace the balance springs and realign the clips, which restores operation without yanking the entire frame out of the wall.
- Worn rollers and tracks on 1000 Series sliding doors. Pasadena’s dry summers kick up fine dust from the San Gabriel Mountains, and that grit works its way into door tracks. The polycarbonate shoes on the rollers chip, the door starts binding, and eventually it takes two hands to open. We replace the roller assemblies and clean the track, then check the frame for bowing that would cause the same problem again.
- Stripped fasteners and oversized mounting holes in aluminum frames. We inherit a lot of homes where a previous DIY attempt left the frame rattling. Aluminum frames are softer than people expect, and an over-torqued screw chews the hole out. The fix is to drill out the damaged area, install a threaded insert, and re-mount the sash or frame properly. It is a small repair that makes the whole window feel solid again.
- Seized weatherstripping and gasket rot on older 900 Series units. Original weatherstripping on units installed in the 1970s and 1980s hardens and cracks in Pasadena’s heat. The window still operates, but air leaks around the edges and dust collects in the corners. We replace the weatherstripping with new material matched to the frame profile, which quiets the window and keeps the indoor air clean.
ES Windows Parts & Our Repair-vs-Replace Approach
We source genuine ES Windows sash kits, balance springs, and weatherstripping when the series is still in production. ES Windows has been manufacturing in Florida since 1962, and many parts for the 900 Series and 1000 Series are still available through supply channels. For discontinued series, we use high-quality aftermarket parts matched by size, finish, and color through our supplier network. We never install a part that changes the look of your window or requires cutting the frame.
The honest call on repair versus replace comes down to the frame. A sash with one bad corner or a worn roller can be rebuilt and put back in service. A frame with multiple seal failures, deformed corners, or warped extrusions is not worth patching. We will tell you when replacement is the better long-term option, and we will put the numbers on paper so you can decide without pressure. Call (626) 714-2992 for an exact quote, and we will walk you through the options.
Our ES Windows Service Process – Step by Step
- 1
Diagnosis. We arrive with shoe covers on, inspect the unit in place, and identify the specific failure: a corner seal, a balancer, a roller, or the frame itself. We measure the sash and opening and check for underlying issues like stucco shifting or water intrusion.
- 2
Written price. Before any work starts, we hand you a line-item price for the repair or replacement. The price you see on paper is the price you pay at the end, no footnotes. If we find something deeper after the sash is out, we stop and explain it before touching anything else.
- 3
Repair or install. We pull the sash, replace the failed part, and reassemble with care. For replacements, we remove the old unit, prep the opening, set the new window, flash and seal it for Pasadena’s winter rain, and trim out the interior and exterior as needed.
- 4
Test and verify. We operate the sash multiple times, check the seal, and confirm the lock engages. We test for air leaks and, on doors, for smooth travel. The unit leaves our hands working correctly, not just looking right.
- 5
Clean-up and warranty. We wipe down the work area, vacuum, and take a photo of the clean-up before leaving. Every job carries the 365-Day Done Right Promise: if something is not right after the work is complete, we make it right.
See the difference
Before
After
Before
After
Before
AfterES Windows Products We Service & Install in Pasadena
Our crews work on ES Windows 900 Series aluminum windows, the 7000 Series vinyl line, 1000 Series architectural aluminum, and Impact Gard hurricane-resistant units. We stock common rollers, balance springs, corner keys, and weatherstripping for these series locally, which means less waiting when a sash binds or a spring fails. We also order replacement sashes and full units directly through our supply network for jobs where the frame has reached the end of its life. Whether you need a single window serviced or a full replacement across multiple rooms, we handle the whole scope with the same written price and clean-up standard.
We Also Service These Brands
If your Pasadena home mixes window brands, we work across the spectrum. Our crews install and service KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, Kohler, Moen, and Grohe fixtures, and James Hardie exteriors. You do not need a different contractor for every material in your home.
FAQs – ES Windows Construction Service in Pasadena
Can you match existing ES Windows 900 Series aluminum finishes on a Pasadena mid-century home?
Yes. The 900 Series came in anodized aluminum finishes that have aged in a particular way on Pasadena homes, and we match replacement sashes and frames to the existing finish as closely as the current supply allows. When the original anodized finish is no longer produced in exact tone, we source the closest available match and discuss the difference with you before ordering. Call (626) 714-2992 and we will take a look at your existing units and tell you what is possible.
Do ES Windows 7000 Series vinyl windows need special flashing in Pasadena’s stucco walls?
They need proper flashing, yes. Pasadena’s stucco exteriors are unforgiving when water gets behind the wall: the building paper is the real drainage plane, and a window set without a correct pan and head flashing will eventually leak into the framing. On 7000 Series vinyl replacements in stucco openings, we use a sill pan, back-caulk the flange, and layer the head flashing so winter rain drains away from the opening, not into it. This is standard practice on our jobs, not an upgrade.
Can you replace just the glass in an ES Windows Impact Gard unit without changing the whole frame?
Sometimes. Impact Gard units use laminated glass that is bonded to the frame, and if the seal has failed or the glass is cracked, the repair depends on the series and the frame condition. If the frame is solid, we can order a replacement insulated glass unit matched to the original spec. If the frame is deformed or the wall opening has shifted, replacing just the glass becomes a temporary fix and we will tell you that before you spend the money. Call (626) 714-2992 for a diagnosis and an honest recommendation.
Why do my ES Windows 1000 Series sliding doors bind after a few years?
Binding on 1000 Series sliders is almost always the roller assemblies. The polycarbonate shoes wear down, chip, and drag on the track, and Pasadena’s dry-season dust accelerates the wear. The fix is to remove the door panel, replace the rollers, and clean and lubricate the track. If the frame itself has bowed or settled, we check that too and correct the alignment so the new rollers do not wear out the same way in another few years.
Are ES Windows easier to repair or replace after Pasadena’s hot summers?
Most ES Windows repairs are straightforward when the problem is a single part: a balancer, a roller, a corner key, or a gasket. Those are fast, discrete fixes. The calculus changes when the frame has been baked by thirty or forty Pasadena summers and the aluminum or vinyl has lost its integrity. At that point, replacement is often the smarter use of your money, and we will put both options in writing with numbers so you can decide on facts, not on a sales pitch. Estimates are free, and the number to call is (626) 714-2992.
How much does ES Windows construction cost in Pasadena?
Pasadena pricing for our most common ES Windows services is below. These ranges are for the full scope including labor and materials at typical local rates. A sash replacement runs $800 to $2,500 depending on series and finish. Full window replacement runs $4,500 to $15,000. Impact-rated installation runs $8,000 to $25,000. A full bathroom remodel with ES Windows upgrades runs $9,000 to $28,000. For an exact quote on your home, call (626) 714-2992 and we will give you a written number.
| ES Windows Service | Typical Pasadena Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Full Bathroom Remodeling | $9,000 – $28,000 |
| ES Windows Sash Replacement (Part + Labor) | $800 – $2,500 |
Book Your ES Windows Service in Pasadena, CA
Call (626) 714-2992 to schedule a free estimate on your ES Windows repair, replacement, or installation in Pasadena. We will walk your home with you, explain what we see, and put a written price in front of you before any work starts. Drop cloths, shoe covers, and a photo of the clean-up are included on every job.
Written by Graham Stein, Owner at Elmstead Remodeling Pasadena, offering General Contractor services in Pasadena and the San Gabriel Valley since 2005.
