Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Pasadena Owner’s Guide
A full Tremron bathroom remodeling project in Pasadena typically runs between $9,000 and $28,000 installed, with most families landing around $14,000 to $18,000 for a standard 5×8 bathroom. We stock Tremron-compatible pavers, coping, and edging materials on our trucks and can usually begin work within two weeks of the written estimate. Most Pasadena homeowners discover they need this work when they notice shifting or cracked Tremron pavers around a bathroom floor drain, water pooling in low spots, or grout lines that have begun to crumble after years of moisture exposure.
We’re an independent remodeling contractor in Pasadena, not affiliated with Tremron, but we’ve worked with their paver and hardscape lines long enough to know exactly which products handle Southern California bathroom moisture best. If you’ve got a Tremron bathroom floor, shower surround, or accent wall that’s failing, you’re in the right place. Graham Stein has been through enough of these walkthroughs to know the question you’re actually asking: what’s this going to cost, and can you fix it without making my house look like a construction site for a month? Yes to both, and here’s the full picture.
Which Tremron Models This Applies To
Tremron manufactures concrete pavers, wall systems, and coping in several product lines, and the bathroom applications we see most in Pasadena homes involve their Mega-Olde Towne, Village Square, and Holland Stone pavers used as bathroom flooring or shower surrounds. The critical compatibility detail: Tremron pavers come in thicknesses ranging from 60mm to 80mm, and the installation base underneath matters just as much as the paver itself. A bathroom floor built on 60mm pavers over an improper mortar bed will fail years before a properly installed 80mm paver over a sloped drainage plane.
To identify your exact Tremron product, look at the bottom edge of any paver you can lift or the paperwork from the original install. Tremron stamps their product codes on the underside of most pavers, and the code tells us the series, color blend, and thickness. If the stamps have worn away, measure the paver thickness with a ruler: 60mm, 70mm, or 80mm. The OEM replacement is the safest match, but quality aftermarket equivalents from local Pasadena stone yards often cost 15-20% less and hold up identically in Southern California’s dry heat and occasional humidity. We’ll show you both options on the written estimate, with the price difference spelled out line by line.
Styles & brands we work with
Signs Your Tremron Bathroom Remodeling Is Failing
- Hairline cracks spreading across multiple pavers: This usually means the mortar bed underneath has shifted or settled. In Pasadena’s older homes, especially those built before 1950, bathroom subfloors weren’t always reinforced for the weight of concrete pavers, and the stress eventually shows on the surface.
- Water pooling in corners or around the drain: Tremron pavers are porous by design, and if the slope underneath wasn’t pitched correctly at installation, water sits instead of draining. Over time this erodes the mortar bed and creates the exact conditions for mold growth.
- Loose or rocking pavers: A paver that moves underfoot means the bond between paver and bed has failed. This is common in bathrooms where the original installer used standard thinset instead of a polymer-modified mortar rated for wet areas.
- Crumbling grout lines or sand loss between pavers: In a bathroom, that sand-and-grout failure usually points to moisture intrusion. Bathrooms need sealed joints, not standard paver sand, and many Pasadena homes we visit have the wrong joint material installed from day one.
- Efflorescence that won’t scrub away: A white chalky film that keeps returning means water is moving through the paver and drawing minerals to the surface. It’s a symptom, not the problem: the real issue is a drainage or waterproofing failure underneath.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Pasadena, a Tremron bathroom remodel lands between $9,000 and $28,000 depending on the bathroom size, the Tremron series you’re matching, and whether we’re doing a floor-only refresh or pulling out and rebuilding the full shower surround. A smaller bathroom with a straightforward paver floor replacement usually starts around $9,000. A larger bathroom with a full Tremron paver floor, shower pan replacement, and accent wall runs toward the upper end of that range.
That price includes the pavers, the proper mortar and waterproofing materials, tear-out of the old failing surface, disposal, and the finished installation. You get a written price before any work starts, and that number doesn’t move unless you change the scope. We don’t do estimates that grow after the crew arrives. Every Tremron bathroom project we complete carries the 365-Day Done Right Promise: if something isn’t done right in the first year, we come back and make it right. The price you see on paper is the price you pay at the end – no footnotes.
DIY or Call Us?
What you can safely do: lift one loose paver to check the stamp code, measure the thickness, and take photos of the failure from a few angles. That information helps us give you an accurate written estimate faster. What you shouldn’t attempt: pulling up a Tremron bathroom floor yourself, especially in a Pasadena home with original subflooring. Once you break the waterproofing membrane underneath, you’ve created a moisture path into your framing, and the repair bill goes up by thousands. Bathroom paver work also involves cutting stone, lifting heavy material, and working around plumbing drains – a job where the wrong move means water damage to the room below.
If you want to talk through what you’re seeing before committing to anything, call us at (626) 714-2992. We’ll help you figure out whether you’re looking at a simple repoint or a full bed replacement, and there’s no charge for the conversation.
FAQs
A properly installed Tremron bathroom floor with a correct waterproofing membrane and sloped drainage plane should last 20 to 30 years in Pasadena’s climate. Failures we see at the 8 to 12 year mark are almost always installation issues – wrong mortar, missing waterproofing, no slope – rather than a defect in the Tremron product itself.
Yes, if the failure is isolated to a few pavers and the underlying bed is still solid, we can do a spot repair. In our experience with Pasadena bathrooms, about 40% of calls are repairable. If the waterproofing membrane has been compromised or the bed has shifted, a full section rebuild is the only fix that won’t fail again within a year. Call (626) 714-2992 and we’ll tell you which situation you’re in.
Most Tremron bathroom floor replacements in Pasadena take 3 to 5 working days from tear-out to finished surface. A full bathroom remodel including shower surround and accent walls typically runs 2 to 3 weeks. We schedule around your family’s routine: quiet tools during nap hours and school hours whenever possible, drop cloths on every floor the crew crosses, and shoe covers at the door.
We stock Tremron-compatible pavers, coping pieces, and edging materials, and we source the exact Tremron series match when the product code calls for an OEM piece. You won’t need to order anything or coordinate with a separate supplier. We also work with KraftMaid, Cambria, and Silestone products when a bathroom remodel expands beyond the paver work.
Not always. Concrete pavers are significantly heavier than ceramic tile or vinyl, and many pre-1950 Pasadena homes need subfloor reinforcement or a lighter installation approach before we lay the new surface. We check this during the walkthrough and include any necessary structural work in the written price, so you won’t get a surprise line item after the crew starts.
Written by Graham Stein, Owner, Elmstead Remodeling Pasadena at Elmstead Remodeling Pasadena, serving Pasadena and nearby areas.
