Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Kitchen Remodeling: The Pasadena Owner’s Guide
If you have a Tremron kitchen and something has stopped working the way it should, you’re in the right place. We stock and install the replacement components that keep Tremron kitchens functional, and a full kitchen remodel on a Tremron home in Pasadena typically runs between $14,000 and $45,000 depending on cabinet count, countertop material, and how much of the existing layout you’re changing. Most questions start with a single symptom: a drawer that no longer closes flush, a hinge that’s sagging under the weight of a solid-wood door, a cabinet box that has swollen at the base where water worked its way under the toe kick.
The honest part is that Tremron kitchens, like every kitchen, wear in predictable places first. We see it most often in hinges and drawer glides, then in the cabinet boxes near the sink and dishwasher, then in the corner hardware where a lazy susan or pull-out has been forced one too many times. By the time a homeowner calls us, they usually know exactly which part is failing. What they need is someone who can match it, price it honestly, and install it without making the problem bigger.
Which Tremron Models This Applies To
Tremron cabinetry is built on a few specific hinge and glide platforms, and the compatibility question almost always comes down to two things: the overlay measurement on the door and the age of the cabinet line. The overlay is the distance the door edge overlaps the cabinet frame, and Tremron has used both 1/2-inch and 1-1/4-inch overlays across different production years. If you measure the overlay and it doesn’t match the replacement hinge you bought, the door will sit proud of the frame or rub against its neighbor. That measurement is the single most useful piece of information you can bring to a parts conversation.
The second compatibility gotcha is the drawer glide style. Tremron has used side-mount ball-bearing glides on most production runs, but some earlier Pasadena remodels from the late 1990s and early 2000s have epoxy-coated European-style glides that require a different mounting clip. We keep both styles on the truck because guessing wrong means a second trip and a drawer that still doesn’t feel right. For most Tremron kitchens we service in Pasadena, a quality aftermarket glide or hinge from a manufacturer like Blum, Grass, or Salice performs every bit as well as a Tremron-labeled part, and often carries a longer manufacturer warranty. The exception is any part with a Tremron-specific finish color or a non-standard mounting pattern, where OEM is the safer call. We’ll tell you which path makes sense for your specific cabinet and why, before you spend a dollar.
Styles & brands we work with
Signs Your Tremron Kitchen Remodeling Is Failing
- A drawer or door that drags or sticks when you open it. In almost every case, this is a worn glide or a hinge that has lost its adjustment. The ball bearings inside the glide have flattened out after years of opening and closing, and the drawer is now riding on metal-on-metal contact. Once that wear pattern starts, tightening screws won’t fix it for long.
- Water staining or swelling at the cabinet base near the sink or dishwasher. The cabinet box is made of wood product that absorbs moisture. A slow leak under the sink, a dishwasher that didn’t seal on install, or years of small splashes that never got dried can swell the toe kick and the bottom panel. This is a structural issue, not a cosmetic one, and it often means the cabinet box itself needs replacement rather than just the door or drawer front.
- A hinge that lets the door drop so it rubs against the cabinet below. The screws have likely stripped in their holes over time, or the hinge’s internal spring has fatigued. On solid-wood Tremron doors, the extra weight accelerates this. Re-tightening helps for a few weeks, then the door sags again because the screw no longer has wood to bite into.
- A corner cabinet pull-out or lazy susan that jams or spins unevenly. The pivot post or the mounting hardware has come out of square, usually from being overloaded or from a pot or pan getting wedged behind the mechanism. Forcing it back into alignment bends the mounting plate, and then nothing lines up again.
- Soft-close doors that now slam shut. The soft-close damper inside the hinge is a small pneumatic cylinder. It wears out. When it goes, the door closes fast and loud. The good news is that the damper is often replaceable on its own, without swapping the entire hinge.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a targeted replacement, the cost depends on what failed and how many cabinets it affects. Replacing a set of hinges and glides on a single cabinet typically runs between $120 and $350 including the parts and the labor. Swapping a damaged cabinet box near the sink with a matching door and drawer front usually lands between $400 and $900 per cabinet. A full Tremron kitchen remodel in Pasadena, where we’re replacing cabinets, countertops, and hardware throughout, sits in the $14,000 to $45,000 range we mentioned earlier. That range moves based on the countertop material you choose, whether we’re changing the footprint or keeping it, and the cabinet line we’re installing.
| Scope of Work | Typical Installed Price in Pasadena |
|---|---|
| Hinge and glide replacement, single cabinet | $120 – $350 |
| Cabinet box replacement near sink/dishwasher | $400 – $900 per cabinet |
| Full kitchen remodel (cabinets, countertops, hardware) | $14,000 – $45,000 |
Every quote we give is a written, line-item price before any work starts. The price you see on paper is the price you pay at the end, no footnotes. You’ll know exactly what the parts cost, what the labor costs, and what we’re protecting while we work. The work itself is covered by our 365-Day Done Right Promise: if something isn’t right after we leave, we make it right.
DIY or Call Us?
There are a few things you can check safely before calling. Look at the hinge screws to see if they’re loose. Look under the sink with a flashlight for staining or swelling. Measure the overlay on a door that still closes properly and compare it against the door that’s giving you trouble. None of that requires tools, and it gives us a head start on the phone.
Where DIY goes wrong on cabinet repairs is usually the screw stripping. Once a hinge screw has stripped its hole in a cabinet door, the fix is not a bigger screw. The fix is to drill out the hole, glue in a hardwood dowel, and remount the hinge after the dowel cures. Done too fast, the door splits. Done with the wrong glue, the repair fails in weeks. We’ve also seen homeowners replace one hinge with an aftermarket part that doesn’t match the overlay, and then the door never closes right again. For rough handling of soft-close hardware and structural cabinet damage, this is a job where a careful hand saves you money. Call us at (626) 714-2992 and we’ll talk through what you’re seeing.
FAQs
Most Tremron hinges and drawer glides last 15 to 20 years under normal use in Pasadena’s dry climate, though the soft-close dampers inside the hinges often wear out sooner, around the 8 to 12 year mark. Coastal moisture shortens that lifespan, but in the San Gabriel Valley the bigger enemy is heat cycling, which can make wood product swell and contract enough to loosen screw holes over time. Call (626) 714-2992 if your kitchen is showing its age, and we’ll tell you honestly what’s still serviceable.
Damaged hinges, glides, and soft-close dampers can almost always be repaired or replaced without touching the cabinet boxes themselves, and that’s usually a few hundred dollars rather than a few thousand. The line we draw is structural damage: a swollen base panel or a cabinet box that’s lost its square means repair becomes a patch job, and a patch job never feels right. We’ll give you the honest call on repair versus replacement when we see the cabinet.
Swapping hinges and glides on one or two cabinets takes about an hour to an hour and a half on site, including checking the door alignment and adjusting the soft-close tension so every door closes at the same speed. Replacing a damaged cabinet box is usually a half-day job because the countertop above it needs to be supported while the old box comes out. We’ll give you a written time estimate with the price, before we start.
We keep common overlay sizes of soft-close hinges and side-mount glides on the truck, along with the mounting clips for older European-style glides we still see in Pasadena kitchens. For Tremron-specific finish colors or non-standard mounting patterns, we order OEM parts so the match is exact. We’ll tell you at the estimate whether your parts are on the shelf or need to be ordered, and how long the order will take.
If you have a Tremron kitchen in Pasadena and something is failing, call us at (626) 714-2992. We’ll talk through the symptom, tell you what we think over the phone, and give you a written price before any work begins. No voicemail, no bot, no waiting until Monday. Graham Stein leads our team and personally reviews the scope and the line-item price on every project that goes out. Estimates are free.
Written by Graham Stein, Owner, Elmstead Remodeling Pasadena at Elmstead Remodeling Pasadena, serving Pasadena and nearby areas.
